B350 1 Ton Van V8-360 5.9L (1994)
Front Door Window Glass Weatherstrip: Service and Repair
Window Glass, Seals, And Channel
WINDOW GLASS BELTLINE WEATHERSTRIP SEALS REMOVAL
The window glass beltline weatherstrip seals can be removed according to the following procedure.
1. Open the window glass completely.
2. Pry the inner and outer seals from the door panels with a small putty knife (or similar tool).
3. Remove the beltline weatherstrip seals from the door.
INSTALLATION
1. Open the window glass completely.
2. Position the beltline weatherstrip seals on the door panels and force them downward until they are "seated" on the panels.
Door-to-Body Weatherstrip Seal
DOOR WEATHERSTRIP SEAL REMOVAL
The door-to-body weatherstrip seal is attached to the door inner panel with integral retainers that are inserted into the panel holes.
1. Start at the lower ends and pull outward on the seal to separate the retainers from the holes in the door inner panel.
2. Continue around the perimeter of the seal and pull outward on the seal to separate the retainers from the holes in the door inner panel.
3. Remove the seal from the door.
INSTALLATION
The door-to-body weatherstrip seal is installed by inserting the retainers in the door inner panel holes around the perimeter of the door.