B350 1 Ton Van V8-360 5.9L VIN W (1985)
FIGURE B
3.
Install the 7.5" piece of 3/8" hose to the 3/8" nipple at the center of the external bowl vent valve, PN 5214336. Install the 10.5" piece of 3/16"
hose to the bowl vent valve (Figure B).
FIGURE C
4.
Remove the rubber cup from the bowl vent nipple on the carburetor (Figure C). Install the free end of the 3/8" hose attached to the external bowl
vent in Step 3 to the bowl vent nipple on the carburetor.
The 3/8" open nipple of the external bowl vent valve is to be located at the bottom side as it is installed. Connect the other end of the 3/16" hose to the
nipple of the air, pump pressure tap adapter installed in Step 1.