B350 1 Ton Van V8-5.9L VIN Z (1992)
1. Position the weatherstrip seal on the door.
2. Start at the upper, rear corner of the door. Simultaneously, move forward and downward around the perimeter of the door and insert the seal
retainers in the panel holes. Seal positioning at the corners is critical. The seal must be firmly "seated" at each corner. Avoid "puckering" and
stretching the seal at the corners.
3. When correctly installed, the seal ends will meet exactly at the door lower centerline.
4. Inspect the fit of the door in the body door opening. If crushed, the seal will rapidly deteriorate. If not correct, adjust the door-to-body fit so that
the seal is not crushed when the door is closed.
