dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Heater/AC Blower Motor Fan Switch - Inoperative|Page 3433 > < Blower Motor Resistor|Locations
Page 1
background image

Blower Motor Switch: Customer Interest
Heater/AC Blower Motor Fan Switch - Inoperative

NO.: 
24-03-92

GROUP:
Heater & A/C

DATE:
Aug. 24, 1992

SUBJECT:
Inoperative Heater/AC Blower Motor Fan Switch

MODELS:
1986-1988 

(B) Ram Van/Wagon

1989-1992 

(AB) Ram Van/Wagon

SYMPTOM/CONDITION:

Customer complaints of inoperative blower motor switch or repeated blown fuses. This condition occurs most often if the blower is operated on the
"high" blower position.

PARTS REQUIRED:

1

Blower Motor Switch Package

4723982

Package Contents:
1

Blower Motor Wiring Assembly with Relay

4723644

5

Tie Straps

6015756

1

Instruction Sheet

1

Heat Shrink Tubing

4419644

REPAIR PROCEDURE:

This repair involves replacement of blower motor switch with a revised switch and installation of a wiring harness with relay assembly.

1.

With ignition key in the OFF position, disconnect the negative battery cable.

2.

Remove the steering column cover as outlined in the appropriate service manual, see Figure 1.

Heater/AC Blower Motor Fan Switch - Inoperative|Page 3433 > < Blower Motor Resistor|Locations