Caliber L4-2.0L (2008)
1. Lubricate shoe contact areas on support plate and anchor using Mopar(R) Brake Lubricant or equivalent.
2. Lubricate the adjuster screw threads with Mopar(R) Brake Lubricant or equivalent. Turn adjuster wheel in until it is completely seated.
NOTE: Right side drum brake shown. Left side is a mirror image.
3. Place one front shoe (6) and one rear shoe (3) inboard-side-up on a flat surface. (rear shoe has parking brake lever attached to it).
4. Install the adjuster (5), adjuster wheel toward the rear, between the two brake shoes. Make sure the wide notch in the rear fork aligns with the
parking brake lever (2).
5. Install the upper return spring (1) as shown.