Caliber L4-2.4L (2009)
alignment rack/lift runway surface.
4. Compare the measurements to specifications listed in the following CURB HEIGHT SPECIFICATIONS chart. Maximum left-to-right
differential is not to exceed 12.5 mm (0.5 in.).
5. If curb height is found to be out of specification and there is no sign of excessive body damage, curb height can be changed by replacing the
applicable spring with a spring offering a different check load. See: Suspension/Suspension Strut / Shock Absorber/Service and Repair/Removal
and Replacement/Front Strut / Shock/Removal
CURB HEIGHT SPECIFICATIONS - 2.0L GAS ENGINE
CURB HEIGHT SPECIFICATIONS - ALL OTHERS