Caliber L4-2.4L (2009)
12. Slide the disc brake caliper (2) and adapter (3) assembly over brake rotor and brake support plate.
13. Install the two bolts (1) securing disc brake caliper adapter (3) to the brake support plate (4). Tighten the mounting bolts to 71 Nm (52 ft. lbs.).
14. Position the brake tube on the trailing link inserting the tube into the routing clip (2) and routing bracket over the welded stud.
15. Install the nut (1) on the welded stud. Tighten the nut to 15 Nm (11 ft. lbs.).
16. Position the brake flex hose (1) at the trailing link (3) bracket and install the mounting screw (2). Tighten the screw to 23 Nm (17 ft. lbs.).