Caravan L4-2.4L VIN B (2003)
Input Shaft: Service and Repair
Assembly
ASSEMBLY
NOTE: When servicing the input shaft assembly, all snap rings MUST be replaced with new ones upon assembly. 5th gear nut must also be replaced.
NOTE: When installing 3/4 synchronizer hub to shaft, make sure to align oil slots on synchronizer hub face with oil hole in the shaft splined hub
journal.
NOTE: Refer to (Fig. 215) for input shaft assembly reference.
1. Install input shaft into fixture 8487.
2. Install thrust washer if removed upon disassembly.