Caravan V6-201 3.3L (1995)
Electronic Brake Control Module: Service and Repair
1. With ignition switch in Off position, disconnect both battery cables and remove battery, then remove battery tray from vehicle.
2. Remove Controller Anti-lock Brake (CAB) from battery tray support bracket.
3. Loosen bolt securing 60-way connector to CAB, then disconnect connector from CAB by pulling straight out. Do not twist connector.
4. Remove CAB with its mounting bracket from vehicle.
5. Reverse procedure to install, noting the following:
a. Ensure ignition switch is still in Off position before connecting 60-way connector to CAB.
b. Torque connector bolt to 38 inch lbs. and CAB assembly mounting bolt to 14 inch lbs.
