Caravan V6-3.3L VIN R (2003)
Sliding Door Striker: Service and Repair
Rear Latch Striker
REAR LATCH STRIKER
REMOVAL
1. Open sliding door.
2. Mark outline of striker on C-pillar door jamb face to aid installation.
Fig. 9
3. Remove screws attaching striker to C-pillar (Fig. 9).
4. Remove striker from vehicle.
INSTALLATION
1. Place striker in position on vehicle.
2. Align striker to outline marks on C-pillar.
3. Install screws attaching striker to C-pillar. Tighten screws to 28 N.m (21 ft.lbs.) torque.
4. Verify sliding door alignment and operation.