Caravan V6-3.3L VIN R (2003)
Fig.7 Rear Heater - A/C Unit Mounting Studs
9. Lower the vehicle.
10. Remove the right quarter trim panel and right D-pillar trim panel from the quarter inner panel. Refer to: "Body and frame : Interior Trim : Trim
Panel : Service and Repair" See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair
11. Remove the rear A/C distribution duct from the rear heater-A/C unit and the rear roof duct.
12. Disconnect the body wire harness connector for the rear heater-A/C unit housing from the rear HVAC wire harness connector located near the
expansion valve at the back of the unit.
13. Remove the two screws that secure the top of the quarter trim panel attaching bracket to the quarter inner panel.
14. Remove the two screws that secure the bottom of the quarter trim panel attaching bracket to the rear heater-A/C unit housing.
15. Remove the rear heater distribution duct from the right quarter inner panel.
16. Take the proper precautions to protect the carpeting below the rear heater core from spilled engine coolant and have absorbent toweling readily
available to clean up any spills.
17. Disconnect the heater hoses at the rear heater core.
18. Install plugs in, or tape over the opened heater core fittings and both heater hoses.
19. Use absorbent toweling to mop up any engine coolant spills from the preceding operation.
20. Remove the screw that secures the back of the rear heater-A/C unit housing to the right D-pillar.