Caravan V6-3.3L VIN R (2003)
Fuel Gauge Sender: Service and Repair
FUEL LEVEL SENDING UNIT / SENSOR
REMOVAL
Remove fuel pump module. See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and Repair
Fig. 2 Fuel Pump/Level Sensor Electrical Connector
1. Depress retaining tab and remove the fuel pump/level sensor connector from the BOTTOM of the fuel pump module electrical connector (Fig. 2)
NOTE: The pump module harness on TOP of flange is not serviceable or removable.
2. Pull off the locking wedge.
Fig. 3 Wire Terminal Locking Finger
3. Using a small screwdriver lift locking finger away from terminal and push terminal out of connector (Fig. 3).