Caravan V6-3.3L VIN R (2003)
13. Install the spring wave washer on the end of the stub axle.
14. Install the hub nut lock, and a new cotter pin. Wrap cotter pin prongs tightly around the hub nut lock.
15. Install wheel and tire assembly. Install and tighten the wheel mounting nuts in proper sequence until all nuts are torqued to half the required
specification. Then repeat the tightening sequence to the full specified torque of 135 Nm (100 ft. lbs.).
16. Lower vehicle.
17. Set front wheel alignment camber and toe as necessary.
