dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Crossmember/Alignment/Wheels/Tires - Vehicle Drifts Left|Page 6883 > < Tires/Alignment/Crossmember - Vehicle Drifts Left|Page 6877
Page 1
background image

Cross-Member: All Technical Service Bulletins
Crossmember/Alignment/Wheels/Tires - Vehicle Drifts Left

NO: 22-07-94

GROUP: Tires and Wheels

DATE: Oct. 21, 1994

SUBJECT:
Tire Leads/Drifts Left

THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 22-04-93 DATED JUN. 11, 1993 WHICH SHOULD BE NOTED IN YOUR
FILES AND THE 1993 TECHNICAL SERVICE BULLETINS MANUAL (PUBLICATION NO. 81-699-94000). THIS REVISION INCLUDES
ADDING 1994 AND 1995 MODEL VEHICLES, ADDS STEP 8 AND CHANGES THE FAILURE CODE. ALL REVISIONS ARE HIGHLIGHTED
AND WITH **ASTERISKS**.

MODELS:

1991 - **1995** (AS) Town & Country/Caravan/Voyager

SYMPTOM/CONDITION:

Some vehicles may exhibit a tendency to drift left. Road surfaces have significant effect on drift tendencies.

DIAGNOSIS:

Test drive the vehicle on a road surface that slopes down to the right. On lanes that slope down to the right, the vehicle should track with little or no drift.
On lanes that slope down to the left, a slight drift to the left is expected and normal.

If the vehicle exhibits a tendency to drift left while in lanes that slope to the right, the following diagnostic procedures should be followed:

A.

Cross switch the front tire/wheel assemblies and re-evaluate the vehicle. If the drift is corrected, return the vehicle to the customer. If the drift to
the left becomes worse, return the tire/wheel assemblies to their original positions and perform step B of the diagnosis. If the drift to the left is
unchanged, perform step B of the diagnosis.

B.

Check and adjust as necessary, the front alignment to the following preferred specifications:

Camber:

0.3 degree positive

Toe:

0.1 degree in.

If the vehicle still drifts left while in lanes that slope to the right, perform the repair procedure.

PARTS REQUIRED:

1

6502553

Screw and Washer Assembly

REPAIR PROCEDURE:

This bulletin involves repositioning the front crossmember.

1.

Raise the vehicle on a hoist that leaves the front wheels unsupported.

Crossmember/Alignment/Wheels/Tires - Vehicle Drifts Left|Page 6883 > < Tires/Alignment/Crossmember - Vehicle Drifts Left|Page 6877