Caravan AWD V6-201 3.3L (1991)
1. Lubricate both adapter ways with a liberal amount of Mopar Multipurpose Lubricant, or equivalent.
2. Remove the protective paper from the noise suppression gasket on both the inner and outer brake shoe assemblies.
3. Install the new inboard brake shoe assembly on the adapter being careful not to get any grease from the adapter way on the surface of the brake
lining material.
Removing Or Installing Brake Disc
4. Install rotor.
Removing Or Installing Outboard Shoe
5. Slide the new outboard shoe assembly onto the adapter