Caravan AWD V6-201 3.3L (1991)
Brake Shoe Contact Pads On Backing (Support) Plate
NOTE: Lubricate the six shoe tab contact pads on support plate with a thin film of MOPAR Multi- Purpose Lubricant, Part number 2932524 or
equivalent.
NOTE: Support plates and park brake assemblies are NOT SYMMETRICALLY OPPOSITE.
-
Right Side: Parking brake cable enters the support plate at the rear and attaches to the lever attached to the primary shoe. Right side support
and cable assembly is color coded gray.
-
Left Side: Parking brake cable enters the support plate at the front (traditional) and attaches to the lever attached to the secondary shoe. Left
side support and cable assembly is color coded black.
Fig 3 Removing And Installing Shoe Retainers, Springs And Nails
1. Slide primary shoe against support plate, at the same time engage shoe web with wheel cylinder piston and against anchor. Using tool C-4070 or
equivalent install shoe retaining nail, retainer, and spring.
NOTE: For additional information see Brake Spring Removal and Installation Notes.
