dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Anti-lock Brake System High Pressure Hose|Page 5320 > < Recall - Anti-lock Brake System High Pressure Hose|Page 5318
Page 8
background image

21.

Reconnect the battery ground.

22.

Turn the ignition switch to the ON position to start the brake booster pump. Apply the brake pedal several times to distribute the fluid.

23.

Check the master cylinder reservoir fluid level by performing the following procedure:

^

Turn the ignition off and pump the brake pedal 40 to 50 times, until the pedal is hard. The fluid level should be at the top of the inlet screen.
Add brake fluid as necessary using new Mopar brake fluid or an equivalent with SAE 1703 and DOT 3 ratings.

^

Start the vehicle and evaluate the brakes for proper function.

Completion Reporting and Reimbursement

Claims for vehicles which have been serviced must be submitted on the DIAL System. Claims submitted will be used by Chrysler to record recall service
completions and provide dealer payments.

Use one of the labor operation numbers and time allowances (see illustration).

Parts Return

Removed high pressure hoses must be returned to the Warranty Material Return Center.

Note:

See Warranty Policy and Procedure Manual, Chapter 6, Subsection H for complete recall claim processing and material return instructions.

Vehicle Not Available

If a vehicle is not available for service for a known reason, let us know by filling out the pre-addressed Vehicle Disposition Form portion of the Owner
Recall Notification Form or describe the reason on a postcard and mail to:

Chrysler Corporation 415-03-18 
Recall Coordination 
P.O. Box 1919
Detroit, Michigan 48231-9986 

Following the above procedures will expedite the processing of your claim.

If you have any questions or need assistance in completing this action, please contact your Zone Service Office.

Owner Letter

SAFETY RECALL -- ANTI-LOCK BRAKE SYSTEM HIGH PRESSURE HOSE

Dear Chrysler Corporation Vehicle Owner:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

Chrysler Corporation has determined that a defect which relates to motor vehicle safety exists in some vehicles equipped with the anti-lock brake system

Recall - Anti-lock Brake System High Pressure Hose|Page 5320 > < Recall - Anti-lock Brake System High Pressure Hose|Page 5318