dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Mount - Squeak/Clunk Noise|Page 1654 > < Engine Accessory Bracket|Specifications
Page 1
background image

Technical Service Bulletin # 091494

Date: 940809

Engine Mount - Squeak/Clunk Noise

NO.: 09-14-94

GROUP: Engine

DATE: Sep. 9, 1994

SUBJECT:
Squeak Noise When Turning and/or Clunk Noise When Shifting Into Reverse

MODELS:

1991 - 1994 (AS) Town & Country/Caravan/Voyager

SYMPTOM/CONDITION:

1.

Squeak noise from the engine compartment which occurs during a low speed right turn. The squeak noise becomes more pronounced when the
road surface is rough and/or while accelerating during the turn.

2.

Squeak noise from the engine compartment which occurs during a low speed left turn. The squeak noise becomes more pronounced when the road
surface is rough and/or while accelerating during the turn.

3.

Clunk noise from the engine compartment which occurs when shifting transmission into reverse.

Symptom/Condition 1

The squeak noise during right turns can be caused by the top edge of the left engine mount rubbing on the left frame rail bracket, or the outside of the
front engine mount rubbing on the drivers side of the bracket which ties it to the engine.

Inspect the left engine mount visually for a bare metal spot where the paint has been rubbed off of the engine bracket and by the relative position
between the core of the rubber isolator and the nub on the gold "slider tube" (Refer to Figure 1).

Engine Mount - Squeak/Clunk Noise|Page 1654 > < Engine Accessory Bracket|Specifications