Caravan AWD V6-201 3.3L (1991)
Oil Pan: Service and Repair
Removal and Installation
REMOVAL
1. Disconnect battery negative cable, remove engine oil dipstick.
2. Raise vehicle. Drain engine-oil.
3. Remove oil pan screws and remove oil pan.
4. Remove screw for oil pick-up tube and remove pick-up tube.
INSTALLATION
1. Install oil pick-up tube into Chain Case Cover tighten screw to 28 Nm (250 inch lbs.).
2. Apply a 1/8 inch bead of Mopar (R) Silicone Rubber Adhesive Sealant or equivalent, at the parting line of the chain case cover and the rear seal
retainer.
3. Use a new pan gasket.
4. Install pan and tighten screws to 12 Nm (105 inch lbs.).