dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Intake Manifold > < Oil Pick Up/Strainer|Specifications
Page 1
background image

Engine Oil Pressure: Testing and Inspection

Check oil pressure using gauge at oil pressure switch location. Oil pressure should be 34.47 kPa (5 psi) at idle or 205 to 551 kPa (30 to 80 psi) at 3000
RPM.

1. Remove pressure sending unit and install oil pressure gauge.

CAUTION:  If oil pressure is 0 at idle, do not run engine at 3000 RPM.

2. Warm engine at high idle until thermostat opens.

Intake Manifold > < Oil Pick Up/Strainer|Specifications