Caravan AWD V6-201 3.3L (1991)
A/C Coil R&R
12.
Remove the screw that anchors the coil wires to the compressor housing. Remove the coil from the compressor end plate.
INSTALLATION
A/C Coil Alignment
1.
Align the hole in the back of the coil with the pin in the compressor end plate.
A/C Coil Snap Ring R&R
2.
Install the coil retaining snap ring with the beveled side facing outward and both of the snap ring ends away from the alignment pin. Make sure the
snap ring is properly seated in the groove.
3.
Fasten the coil wires to the compressor housing.
