Caravan AWD V6-201 3.3L (1991)
A/C Pulley R&R
4.
Install the pulley and bearing assembly onto the compressor.
A/C Pulley Snap Ring R&R
5.
Install the pulley retaining snap ring with the beveled side outward. Make sure that the snap ring is properly seated in the groove.
Front Plate Shims
6.
Install the original shim(s) on the compressor shaft. If the original shims are not available, use a temporary set of shims that equal .100 in (2.54
mm).
7.
Install the front plate, making sure the key on the compressor shaft aligns with the keyway on the front plate.
