dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Serpentine Drive Belt - Chirping Noise|Page 1019 > < Serpentine Drive Belt - Comes Off Pulleys|Page 1014
Page 1
background image

Drive Belt: Customer Interest
Serpentine Drive Belt - Chirping Noise

NO.: 07-07-92
GROUP: Cooling
DATE: Dec. 14, 1992

SUBJECT:
Serpentine Drive Belt Noise
3.3L and 3.8L Engines

MODELS:

1991-1/2 - 1993

(AC)

Dynasty/New Yorker/New Yorker Salon

1991 - 1993

(AS)

Caravan/Grand Caravan/Caravan CV
Voyager/Grand Voyager/Town & Country

1991-1/2 - 1993

(AY)

Imperial/New Yorker Fifth Avenue

SYMPTOM/CONDITION:

"Chirping" noise being generated from the drive and accessory pulley area of the engine while the engine is running. The condition is most likely
experienced while operating the engine during wet or high humidity conditions.

DIAGNOSIS:

Use a spray bottle filled with water to spray the grooved side of the serpentine drive belt while the engine is running. If the noise subsides, and as the belt
dries the noise returns, serpentine belt misalignment is the problem.

PARTS REQUIRED:

REPAIR PROCEDURE:

This bulletin involves chamfering the hole in the power steering pump bracket that the tensioner attaching bolt passes through and replacement of the
tensioner and serpentine drive belt.

1.

Place the vehicle on a hoist.

2.

Remove the accessory drive splash shield.

3.

Remove the serpentine drive belt.

4.

Remove the automatic tensioner.

Serpentine Drive Belt - Chirping Noise|Page 1019 > < Serpentine Drive Belt - Comes Off Pulleys|Page 1014