dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

General Information|Page 3849 > < General Information|Page 3847
Page 8
background image

PRNDL Switch (Hard-Wired)

NOTE:  Used up to 1995 (Early 96 NS)

The PRNDL Switch is mounted to the case in the valve body area. The input from the switch along with the Park/Neutral position switch tells the TCM
what gear range was selected by the driver. The TCM uses this input to determine what gear range and shift pattern to use.

Park/Neutral Position Switch (Hard-Wired)

NOTE:  Used up to 1995 and early 96 NS

The Park/Neutral position switch operates the Starter Relay and both the Park/Neutral position and Transmission Temperature Sensors operate the 
back-up lamp relay. The Park/Neutral Position Switch does not allow starter engagement in any position other than Park "P" or Neutral "N." Both
switches must be closed to operate the back-up lamps.

Transmission Range Sensor (Hard-Wired)

The Transmission Range Sensor (TRS) replaces the P/N Position Switch and the Transmission Range Switch that are found on vehicles prior to the 1996

General Information|Page 3849 > < General Information|Page 3847