Caravan AWD V6-201 3.3L (1991)
8.
Position the torque shaft and overrunning clutch housing assembly in a vertical position with the rear housing face on a clean flat surface, see
Figure 2.
9.
Install the replacement bearing, PN 4486164, on the torque shaft journal.
10.
Holding the torque tube vertically, slide the tube over the torque shaft. The tube should slide over the front bearing without any forcing and/or
pounding.
11.
Install the torque tube bearing guard (plate), PN 4518506, and retainer, PN 4518551. Ensure the bearing retainer is installed with the fingers
pointing toward the shield.
12.
Install the drive line module.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No. 16-55-01-90 ....... 1.9 Hrs.
FAILURE CODE:
05 - Bearing Defect
