Caravan AWD V6-201 3.3L (1991)
Checking Input Shaft Bearing End Play To Determine Shim Thickness
Input Shaft Shim Chart
6. The shim required for proper bearing end play is the total of the gauging shim thickness, plus end play, minus (constant) end play of 0.051mm
(0.002 inch). Combine shims, if necessary, to obtain a shim within 0.O4mm (0.0016 inch) of the required shim (see Shim Chart for proper shim).
7. Remove input shaft seal retainer and gauging shim. Install shim(s) selected in step (6). Then reinstall input shaft seal retainer with a 1/16 inch bead
of MOPAR Gasket Maker, Loctite, or equivalent for a gasket. Record end play. Observe the CAUTION in step (3). Tighten input shaft seal
retainer bolts to 28 N-m (21 ft. lbs.).
