dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Manual Window Regulator Replacement|Page 7817 > < Front Window - Rolls Up Incorrectly/Weatherstrip Binds|Page 7814
Page 1
background image

Window Regulator: Service and Repair
Manual Window Regulator Replacement

*** THIS ARTICLE HAS BEEN UPDATED BY TSB # 23-29-93 DATED JUNE 4, 1993

Front Door Power Regulator

REMOVAL

1.

Remove trim panel and door liner.  See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair

2.

Remove the front door glass.  See: Window Glass/Front Door Window Glass/Service and Repair

3.

Remove the mounting bolts holding the manual regulator to the inner door panel.

4.

Disengage the push-in fastener holding the regulator cables to the inner door panel.

5.

Remove the manual window regulator from the door.

 
 
INSTALLATION

1.

Install the manual window regulator into the door.

2.

Install the push-in fastener holding the regulator cables to the inner door panel.

3.

Install the mounting bolts that hold the manual regulator to the inner door panel.

4.

Install the front door glass.  See: Window Glass/Front Door Window Glass/Service and Repair

5.

Install the door liner and door trim panel.  See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair

Manual Window Regulator Replacement|Page 7817 > < Front Window - Rolls Up Incorrectly/Weatherstrip Binds|Page 7814