dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Technical Service Bulletins for Window Regulator: > < Front Window - Rolls Up Incorrectly/Weatherstrip Binds|Page 7806
Page 3
background image

3.

Insert a wide flat blade screwdriver or other suitable prying device in the cavity along the A-pillar of the door and carefully pry out to widen the
cavity (refer to Figure C).

4.

Reinstall the glass run weatherstrip into the cavity. Roll the glass to its full up position and remeasure the distance from the outside surface of the
glass to the seam between the flocked (fuzzy) and smooth rubber on the glass run along the A-pillar. If this measurement is less than 9/32 in. (7
mm), repeat steps 1-4 until this measurement is between 9/32 in. (7 mm) and 11/32 in. (9 mm).

5.

Reinstall the door trim panel.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No.

23-33-20-97

0.4 Hrs.

FAILURE CODE: 27 - Damaged

All Technical Service Bulletins for Window Regulator: > < Front Window - Rolls Up Incorrectly/Weatherstrip Binds|Page 7806