Caravan FWD L4-2.4L VIN X (1997)
Camshaft Oil Seal: Service and Repair
REMOVAL
1. Remove front timing belt covers and timing belt.
Camshaft Sprocket-Removal/Installation
2. Hold camshaft sprocket with Special Tools C-4687 and 4687-1 while removing center bolt.
3. Remove rear timing belt cover.
Camshaft Oil Seal-Removal With C-4679-A
4. Remove camshaft seal using Special Tool C-4679-A.
CAUTION: Do not nick shaft seal surface or seal bore
INSTALLATION
1. Shaft seal surface must be free of varnish, dirt or nicks. Polish with 400 grit paper if necessary.
Camshaft Seal-Installation
2. Install camshaft seal into cylinder head using Special Tool MD-998306 until flush with head.