Caravan FWD L4-2.4L VIN X (1997)
Antenna Cap Nut Remove/Install - Typical
10. Remove plastic cap from the cap nut. Using cap nut tool, remove cap nut holding antenna base to front fender.
11. Remove antenna base from under front fender.
INSTALLATION
1. Install antenna base from under front fender.
2. Install plastic cap from the cap nut. Using cap nut tool, remove cap nut holding antenna base to front fender.
3. Slide the plastic sleeve down on antenna mast for access to mast. Install antenna mast from antenna base.
4. Install front wheelhouse splash shield.
5. Install front wheel.
6. Hoist and support vehicle on safety stands.
7. Push antenna cable through hinge pillar into open between door hinges.
8. Engage rubber grommet insulator from door hinge pillar.
9. Install right kick trim panel.
10. Connect antenna cable connector from extension cable.
11. Install glove box from instrument panel.
