Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)
5. Reconnect the liquid line fitting to the filter-drier outlet port on the top of the filter-drier.
6. Install and tighten the screw that secures the liquid line fitting to the filter-drier. Tighten the screw to 2 Nm (18 in. lbs.).
7. Remove the tape or plugs from the liquid line front section fitting for the filter-drier and the filter-drier inlet port.
8. Lubricate a new rubber O-ring seal with clean refrigerant oil and install it on the liquid line fitting.
9. Reconnect the liquid line fitting to the filter-drier inlet port on the top of the filter-drier.
10. Install and tighten the screw that secures the liquid line fitting to the filter-drier. Tighten the screw to 2 Nm (18 in. lbs.).
11. Reinstall the air cleaner housing into the right side of the engine compartment.
12. Evacuate the refrigerant system. Refer to: "Service and Repair" See: Service and Repair
13. Charge the refrigerant system.