Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)
8. Install tie rod end into steering knuckle. Start attaching nut onto stud of tie rod end. While holding stud of tie rod end stationary using a socket,
(Fig. 6) tighten tie rod end to steering knuckle attaching nut. Then using a crowfoot and socket (Fig. 13), tighten the tie rod end attaching nut to a
torque of 75 Nm (55 ft. lbs.).
9. Install braking disc on hub and bearing assembly.
10. Install disc brake caliper assembly on steering knuckle. Caliper is installed by first sliding bottom of caliper assembly under abutment on steering
knuckle, and then rotating top of caliper against top abutment.