Caravan FWD V6-3.3L VIN R (2001)
Cowl Moulding / Trim: Service and Repair
COWL GRILLE
REMOVAL
1. Remove wiper arms.
Fig. 6
2. Remove four (4) screws securing cowl cover to wiper module (Fig. 6).
3. Disengage quarter turn fasteners at outboard ends of cowl grill from body.
4. Release hood latch and open hood.
CAUTION: To prevent hood scratching of cowl grille before removal, cover outboard exterior ends of cowl grille with masking tape or
equivalent method.
NOTE: Do not over bend cowl grille during removal. Bend cowl grille just enough to clear top of wiper pivot shaft and bottom rear corner of
hood.
5. Remove cowl grill by raising above driver side wiper pivot shaft and swinging away towards engine compartment. The cowl grille will need to be
bent on outboard end to clear simultaneously top of wiper pivot shaft and bottom corner of hood.