dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Power Mirror Switch > < Diagram Information and Instructions|Page 8366
Page 1
background image

Power Mirror Control Module: Service and Repair

REMOVAL

1. Disconnect and isolate the negative battery cable.
2. Move seat to full forward position.
3. Working under the seat, disconnect the module wire harness connectors.
4. Remove the module retaining screws.
5. Remove the module from under the seat.

INSTALLATION

1. Install the module under the seat.
2. Install the module retaining screws.
3. Working under the seat, connect the module wire harness connectors.
4. Connect and isolate the negative battery cable.

Power Mirror Switch > < Diagram Information and Instructions|Page 8366