Caravan FWD V6-3.3L VIN R (2001)
Fig. 5
2. Position seat back hinge interlock lever over the top of the outboard child restraint seat hinge (Fig. 5).
3. Install screws attaching child restraint seat module hinges to seat back frame lower rail (Fig. 1).
4. Install screws attaching top of module to seat back frame upper rail (Fig. 3). Tighten nuts to 7 N.m (62 in.lbs.) torque.
5. Install push in fasteners attaching upper bolster to child restraint seat module (Fig. 2).
6. Return seat back to folded position.
7. Install seat back cover.
8. Check belt for smooth operation and verify interlock operation. Recliner should not operate with child seat deployed.
SYNCHRONIZING CABLE ADJUSTMENT
NOTE: Bench seats equipped with child restraint seats have an interlock feature that will not allow the seat back to fold forward with the child seat
open.
If the seat back hinges do not release at the same time the synchronizing cable must be adjusted.
1. Remove seat from vehicle.