Challenger V6-3.5L (2009)
Front Bumper Cover / Fascia: Service and Repair
Front Bumper Fascia - Installation
INSTALLATION
1. Place the front fascia assembly in position and connect the fog lamp wire harness connectors, if equipped.
2. Push the left and front side of the fascia in to the fender mounted fascia mounting brackets.
3. Connect the Tire Pressure Monitoring (TPM) connector.
4. If equipped, connect the headlamp washer system hose from washer reservoir.
5. Raise the vehicle.
6. Install the mounting fasteners that secures the front fascia assembly (9) to the inside of the front fender.
7. Install the belly pan.
8. Install the left and right front splash shields as necessary See: Fender/Front Fender/Front Fender Liner/Service and Repair/Splash Shield -
Installation.
9. Lower the vehicle.