Challenger V6-3.5L (2009)
4. Raise vehicle on hoist.
5. Place a suitable drain pan under crankcase drain.
6. Remove oil pan drain plug from crankcase and allow oil to drain into pan. Inspect drain plug threads for stretching or other damage. Replace drain
plug and gasket if damaged.
7. Remove oil filter (3).
8. Install drain plug in crankcase. Torque oil pan drain plug to 27 Nm (20 ft. lbs.).
9. Install new oil filter (3).
10. Lower vehicle.
11. Fill crankcase (1) with specified amount and type of engine oil. See: Description and Operation
12. Install oil fill cap (1).
13. Start engine and inspect for leaks.
14. Stop engine and inspect oil level (2).
OIL FILTER SPECIFICATION
All engines are equipped with a high quality full-flow, disposable type oil filter. When replacing oil filter, use a Mopar(R) filter or equivalent.
USED ENGINE OIL DISPOSAL