Challenger V8-5.7L (2010)
Front Door Panel: Service and Repair
Front Door Trim Panel - Installation
INSTALLATION
1. Position the top of the door trim panel (2) to the door, ensuring the door lock is inserted through the door trim panel.
2. Connect the electrical connectors and door latch cable to the door trim panel.
3. Firmly seat the top of the door trim panel in position and seat the trim panel to the door from the top to bottom.
4. Install the pushpin fasteners (1) to the door trim panel.
5. Install the screws (4) to the outer edge of the door trim panel (2).
6. Install the screw (3) to the inside pull handle and close the plastic cover.
7. Install the screw (1) to the inside of the interior door handle and close the plastic cover.
8. Connect the battery negative cable.
NOTE: For vehicles equipped with the optional Automatic Express Up power window feature, recalibration of this feature is required
whenever power to the door module is disrupted. See: Starting and Charging/Battery/Service and Repair/Procedures/Battery System -
Battery Reconnection
