Challenger V8-5.7L (2010)
1. Disconnect and isolate the battery negative cable.
2. Remove the screws that secure the steering column cover to the instrument panel.
3. Pull the steering column cover rearward at the top and right side of the cover to release the snap retainers from the instrument panel.
4. Disconnect the wire harness connector from the trunk release switch, if equipped.
5. If required, remove the screws (3) that secures the instrument panel steering column cover reinforcement (1) to the bracket (2) and remove the
reinforcement from the vehicle.
Steering Column Opening Cover - Installation
INSTALLATION
1. If removed, position the instrument panel steering column cover reinforcement (1) onto the bracket (2).
2. Install the screws (3) that secure the instrument panel steering column cover reinforcement to the bracket. Tighten the screws securely.