Challenger V8-5.7L (2010)
2. Siphon power steering fluid from pump reservoir.
3. Remove air cleaner housing and inlet tube to throttle body See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air
Cleaner Housing/Service and Repair/Air Cleaner Body - Removal.
4. Remove bolt (4), then remove pressure hose (3) from pump (1).
5. Raise and support vehicle See: Maintenance
6. Remove belly pan See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal
7. Remove screw (5) securing pressure hose (1) routing clamp to front of engine cradle (3).
8. Remove screw (4) fastening routing clamps securing pressure (1) and return (2) hoses to right side of engine cradle (3).
9. Unthread pressure hose tube nut (2) from steering gear (1).