Challenger V8-5.7L (2010)
Power Steering Pump: Service and Repair
Power Steering Pump - Installation
Automatic Transmission
5.7L/6.1L - AUTOMATIC TRANSMISSION
1. Align the power steering pump (1) with the mounting holes on the engine.
2. Install the three power steering pump mounting bolts (2) through the access holes in the pulley and tighten the bolts to 28 Nm (21 ft. lbs.).
NOTE: Always use a new O-ring on the end of the pressure hose.
3. Lubricate the new O-ring on the end of the pressure hose with clean power steering fluid.
4. Install the pressure hose (2) to the power steering pump (1) and tighten the pressure hose tube nut to 47 Nm (35 ft. lbs.).