Challenger V8-5.7L (2010)
13. Connect the negative battery cable (2).
14. Fill and bleed the power steering system See: Service and Repair/Power Steering System Bleeding
Manual Transmission
MANUAL TRANSMISSION
NOTE: For a vehicle with a manual transmission, it is not possible to remove the power steering pulley without damaging it. If the pulley or
power steering pump require service, a new pulley and pump must be installed.
1. Align the power steering pump (1) with the mounting holes on the engine.
2. Install the three power steering pump mounting bolts (2) and tighten the bolts to 28 Nm (21 ft. lbs.).