Challenger V8-5.7L (2010)
9. Install three nuts (2) fastening shock assembly (4) to shock tower (3). Tighten nuts to 27 Nm (20 ft. lbs.).
10. If equipped, align shock tower cap (1) with shock mounting nuts (2) and snap into place.
11. If installing left upper control arm, install coolant recovery container. See: Engine, Cooling and Exhaust/Cooling System/Coolant
Reservoir/Service and Repair/Coolant Recovery Bottle - Installation
12. If installing right upper control arm, install the totally integrated power module (TIPM).See: Power and Ground Distribution/Power Distribution
Module/Service and Repair/Totally Integrated Power Module (TIPM) - Installation
