Challenger SRT-8 V8-6.1L (2009)
Antenna Amplifier: Service and Repair
Radio Antenna Module - Installation
INSTALLATION
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection .
1. Position the module into place.
2. Install and tighten the mounting fasteners.
3. Connect the wire connectors and the antenna cable to the antenna module.
4. Install the right quarter trim panel. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Luggage Compartment
Trim/Quarter Trim Panel - Installation.
5. Connect the battery negative cable.