Challenger SRT-8 V8-6.1L (2009)
![background image](/dodge/challenger_srt-8/v8-6.1l/Page-2562001.png)
Door Module: Service and Repair
Door Module - Removal
REMOVAL
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection .
1. Disconnect and isolate the battery negative cable.
2. Remove front door trim panel See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim Panel -
Removal.
3. Disconnect electrical harness connectors.
4. Remove mounting fasteners and module.