Challenger SRT-8 V8-6.1L (2009)
Radiator Support: Service and Repair
Headlamp Mounting Crossmember - Installation
INSTALLATION
NOTE: The Vehicle Emission Control Information (VECI) label(s) must be in place for the life of the vehicle. When replacing the component
in which the VECI label is adhered, a new VECI label must also be adhered to the new component.
1. Position the headlamp mounting crossmember (1) into the engine compartment.
2. Loosely install the bolts (2 and 3) that secure the headlamp mounting crossmember to the front fenders.
3. Loosely install the bolts (4) that secure the headlamp mounting crossmember to the front frame rails (5).
4. Align the headlamp mounting crossmember using the alignment marks previously indicated and tighten all of the retaining bolts to 28 Nm (21 ft.
lbs.).
5. Install the bolts (2) that secure the radiator mounting bracket (1) to the headlamp mounting crossmember. Tighten the bolts to 5 Nm (45 in. lbs.).