Challenger SRT-8 V8-6.1L (2009)
Seat Back: Service and Repair
Seat Back - Installation
Front
INSTALLATION
1. Install the seat back to the seat frame.
2. Install the seat back bolts and tighten to 40 Nm (30 ft. lbs.).
3. Position the front seat belt buckle lower anchor onto the stud near the rear of the inboard seat cushion frame. Be certain the anti-rotation tab on the
anchor is engaged in the clearance hole of the frame.
4. Tighten the nut to 43 Nm (32 ft. lbs.)
5. Install the side shields (2) and install the screws.
6. Install the lumbar and recliner handles.
7. Install the seat. See: Service and Repair/Seat - Installation.