Challenger SRT-8 V8-6.1L (2009)
7. Push in the buttons on both headrest sleeves, pull the headrest up and remove.
8. Separate the j-straps (1 AND 2) and pull cover up to gain access to the headrest guides, cutting any hog rings and discarding.
9. Pinch both headrest guides ribs from inside the seat back frame with pliers or equivalent.
10. Strike the bottom of the sleeve with a rubber mallet or equivalent, and remove the headrest guides.
11. Remove the seat cover from the seat back.
Rear
REMOVAL
1. Remove the rear seat cushion. See: Seat Cushion Cover - Removal
2. Remove the seat back. See: Seat Back/Service and Repair/Seat Back - Removal
3. Disengage the J-clip from the seat back.
4. Unzip the seat back cover.
5. Carefully pull the seat cover off, cutting any hog rings and discarding.
6. Remove the seat cover from the seat back.