Challenger SRT-8 V8-6.1L (2009)
![background image](/dodge/challenger_srt-8/v8-6.1l/Page-2698001.png)
Seat Cover: Service and Repair
Seat Cushion Cover - Removal
Front
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Service Precautions
2. Remove the seat from the vehicle. See: Service and Repair/Seat - Removal.
3. Remove the wiring harness from the seat pan and disconnect electrical connectors as required.
4. Remove the seat pan mounting fasteners and remove the seat cushion from the seat frame.
5. Disengage the J-clips and carefully remove the seat cover, cutting any hog rings and discarding.
6. Remove the foam from the seat pan, if required.
Rear
REMOVAL
1. Remove the seat cushion from the vehicle. See:
2. Disengage the seat cover J-clips.
3. Carefully remove the seat cover, cutting any hog rings and discarding.
4. Remove seat cushion foam, if required.