Challenger SRT-8 V8-6.1L (2009)
Seat Cushion: Service and Repair
Seat Cushion Side Shields - Removal
REMOVAL
1. Remove the seat from vehicle. See: Service and Repair/Seat - Removal
2. Remove the recliner and lumbar handles as necessary.
3. Remove the seat buckle, as necessary.
4. Remove the side shield mounting fastener.
5. Carefully pry the side shield away from the seat frame, disengaging the retainers.
6. Disconnect the power seat switch connector, as necessary.
7. Remove the seat side shield from the seat frame.